Orders are shipped within 2 working days from receipt of order, using courier or Royal Mail delivery service, subject to stock availability and our standard terms & conditions.
- We accept Mastercard, VISA & AMEX
- Finance options available for orders over £2000 + VAT
MyoPlus 4 Pro with Bluetooth (Software Included)
New and Improved touch-screen with full colour display. The new interface on the MyoPlus 4 Pro makes it a far more user-friendly unit with with great tools to assist you with all aspects of your treatment sessions.
Designed with Physiotherapists in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use with Bluetooth connection to NeuroTrac Software.
New and Improved touch-screen with full colour display. The new interface on the MyoPlus 4 Pro makes it a far more user-friendly unit with with great tools to assist you with all aspects of your treatment sessions.
Designed with Physiotherapists in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use with Bluetooth connection to NeuroTrac Software.
• 2 channel EMG Biofeedback
• 4 channel NMS stimulator
• 2 channel ETS with 4 channel stimulation
• Wireless connection (Bluetooth) to NeuroTrac Software v5.0 or latest
• Pre-set programmes for Incontinence treatment, Sports and muscular development, neuro-muscular Rehabilitation: 10 x TENS programmes, 10 x NMES programmes, 10 x FES programmes & 1 open EMG display.
• Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
• Multilingual Colour LCD screen and voice prompts for Biofeedback.
• Manual and Automatic threshold control.
• EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
• Stand alone device or used in conjunction with established multilingual software.
• For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
• Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.
• 4 x AA batteries (No mains required).
Myoplus 4 Pro comes with a 3-year warranty, (Terms & conditions apply).
Colour | Mid Blue |
---|---|
Technical | EMG (Biofeedback) Dual channel EMG EMG Range: 0.2 to 2000 μV RMS (continuous) Sensitivity: 0.l μV RMS Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz Selectable Bandpass filter - 3db Bandwidth, a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% - Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% - Reading above 235 microvolts b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10% Notch filter: 50 Hz (Canada 60Hz) - 33 dbs (0. 1% accuracy) Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz Batteries: 4 x 1.5V ( AA battery) Optional Charger: CE approved. Work / Rest periods: 2-99 seconds Number of Trials: 1-99
STIM (Neuromuscular Stimulation) 2 channel Stimulator Amplitude: 0-90 mA into 500 Ohm load - actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA. Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current Pulse width selection: 50-450 μS (2% accuracy) Pulse rate selection: 2-100 Hz (2% accuracy) Work / Rest periods: 2-99 seconds Time 1 - 99 minutes Ramp up time: 0.1 - 9.9 seconds Preset and user programmable treatment programs Automatic output shut off with detection of open electrode above 0.5 mA
Battery: Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA. Environmental Conditions for use: +10 to +30 degrees Centigrade. 0-90% Humidity. Environmental conditions for storage & transport: -10 to +50 degrees Centigrade. 0-90% Humidity. |
Product Dimensions | 15cm x 9cm x 3.5cm |
Net Weight | 0.16Kg |
Gross Weight | 1Kg |