This TENs machine is an advanced and modern digital dual channel unit that features 12 built in and 2 custom programmes to cover a wide range of pain management. It is very simple to use and used by many hospitals and clinics along with 1000's of patients world wide.
The NeuroTrac Tens Machine comes complete with:
1 x 9V Battery
One Packet of 50mm x 50mm skin electrodes
Two Lead Wires
Dual channel: individually isolated circuits.
Amplitude: 0 - 80 mA into 500 Ohm load; indication only.
Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
Selectable pulse width: 50mS -300mS [2% accuracy].
Pulse Rate selection: in the continuous mode 2 Hz - 200 Hz [2% accuracy].
Mode: Continuous, Burst or Modulated.
Burst mode: Bursts of 9 pulses [200 mS] at 150 Hz, repeating twice every second.
Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation.
Width starting at 200 mS and decreasing exponentially to 100 mS in three seconds and then returning back to 200 mS in the next three seconds.
Rate starting at 100 Hz, decreasing exponentially to 65 Hz and then returning to 100 Hz.
Time duration of the treatment selectable: 1 minute to 12 hours.
Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
Manufacturers 2 year warranty on the machine only.
|Product Dimensions||12cm x 6.5cm x 2.5cm|
|Packaged Dimension||28cm x 18cm x 6cm|